Product Information

The QuietStove is one solid piece of metal.  It is constructed with stainless steel, which is corrosion resistant. The QuietStove will make your stove approximately twice as quiet (-10db difference).

  1. 1.If the stove is not fully warmed up the flame may pulsate. Ensure the stove is fully warmed before opening the stove valve all the way to high. Keeping the stove on low to medium for a minute or two (longer in very cold weather) is usually enough time for the stove to become fully warmed.

  2. 2.Do not remove the QuietStove when the stove is running.

  3. 3.Do not remove the QuietStove from the stove until it and the stove have been fully cooled.

  4. 4.If you hear the flame burn, but cannot see it, it could mean that an under burn condition exists. This means the flame is burning inside the cap. The cap may also overheat and the metal may appear orange in color. If this condition is present it is advised to immediately shut off the fuel and wait about 10 to 20 seconds before relighting.

Notes
productinforemove.html
productinfoinstall.html
Removeproductinforemove.html
Installproductinfoinstall.html
QuietStoveindex.html
Product Info*
FAQfaq.html
Storehttp://store.quietstove.com/
Forumhttp://www.quietstove.com/forum
Testimonialstestimonials.html
Homeindex.html